- Conventional tank water heaters
Conventional water heaters work by storing gallons of water within an insulated tank. It then heats up the water at the top and stores it until you require the hot water.
Fortunately, they’re one of the cheapest water heaters available and don’t require much maintenance. At most, you might need to replace a burned out heating element. A conventional, well-maintained water heater should last you at least 12 years.
On the downside, they take up considerable space and aren’t very energy efficient
FYI: Tank water heaters can work with both gas and electric.
A tankless water heater allows you to have a constant supply of hot water. It may cost you more to buy, but if you often require hot water in your home, it’s your best and most convenient choice. What’s more, it’s eco-friendly and there is no chance of the water cooling down or the hot water running out.
The downside to tankless water heaters is that you can't use hot water for two different things at the same time. Apart from the high cost to buy and install them, you will also need frequent maintenance checks.
A solar water heater draws its energy from the sun. It’s the most energy efficient of all heaters. The energy transfers to a closed loop system with a heat-conductive material. It then heats the water in the tank, and hot water flows out.
However, a solar heater often requires a backup plan, such as natural gas or electricity, for cloudy days.
Know your tank sizes
The capacity of your water heater tank determines how much hot water you will have available at once. You can choose your tank water heater size as per your requirements. Here’s an easy way to go about it:
- 30-gallon tank – one to two people in the house
- 40-gallon tank – two to three people
- 50–60-gallon tank – three to four people
- 60–80-gallon electric system or a 50-gallon natural gas or propane system – more than four people
Do you require water heater permits?
A permit is almost always required for water heaters. There will be an inspection once the work is done to make sure your new water heater has been installed or replaced properly, and that it will not create a hazard to the building occupants.
Unfortunately, there are many things that can go wrong with a water heater installation. The dangers may include scalding, bacteria growth, fuel gas leaks, fires or explosions, water leak damage, structural instability or carbon monoxide asphyxiation.
Make sure that someone who is properly trained and licensed is the one to repair, replace or install your water heater . They will make sure that all the safety features are in place, and that the heater (whether running on solar power, propane, gas or electricity) is installed to the current local plumbing code.
Without a permit and inspection, a water heater replacement can be extremely dangerous.
Why should you estimate the cost of your water heater replacement?
Water heaters play an important role in a house. They ensure that hot water is available throughout your home – allowing you to bathe, wash dishes and do your laundry.
Once you decide to get a water heater installed in your home, you need to know how much of an investment you should have for this home improvement.
Naturally, when it’s time to replace a heater, you have to know the cost in order to calculate what you can afford to spend.
It’s also the best way to ensure that you don’t stumble across any unwelcome surprises during the execution of your project.
Acquiring a free estimate for your water heater will help you create a realistic budget for the replacement.
How does Kukun’s water heater replacement cost estimator help you?
Getting an estimate through Kukun’s water heater replacement cost estimator is easy. Just follow the steps below to get your custom, personalized total cost in minutes!
1. Enter the type of remodel from the two options below:
- Replace existing one: This project includes replacing an existing water heater, connecting the new heater to your existing plumbing, and average labor and material costs. Please note that code compliance may incur an extra cost.
- Install new one: This project involves installing a new water heater, connecting it to existing plumbing, and average labor and material costs. Please note that code compliance may incur an extra cost.
2. Choose the type of heater you currently have from these options:
3. Select the size of your heater tank/capacity from the following options:
- 40 — 50 Gallon
- 50 — 75 Gallon
- 80 — 105 Gallon
If you have a tankless heater, this is where you can mention it.
4. Enter your property details
Enter the full address to get ROI /recoup value of your house or just give zipcode to get just the renovation cost estimate.
And there you go! Your water heater installation cost estimate is ready!
With this estimate, you can analyze your finance options or hire a professional to get started on the work right away.
We are happy to offer you options for professional remodeling contractors who have worked in your neighborhood and who have been vetted by your neighbors.
You can explore each contractor's profile, check out their online reviews, and view all their previous permits before hiring them.
The best way to replace your water heaters? Always plan ahead
As part of any home improvement project, it’s best to keep a few things in mind:
- Maintain your budget in order to manage a home renovation seamlessly.
- Choose the most suitable type of water heater according to your needs.
- Plan ahead and don't keep anything pending after your project starts.
- Work with an expert. A professional will ensure that all permits and inspections are up to date.
- A permit is required. An inspection is done to make sure that the water heater is installed properly and does not create a hazard to the building occupants.
- Get a written contract from your contractor. The document should include the payment details as well.
- Be sure to get a warranty or guarantee from your contractor.